Vulcaniza seat-manufacture,factory,supplier from China

(Total 10 Products for Vulcaniza seat)

EPDM Seat U Type Butterfly Valve

Technical Parameters:SizeDN32-DN600DN650-DN2000Working pressure16Bar10BarShell24Bar15BarSeal(Air)6Bar6BarOperating Temperature-40℃~+160℃Operating EnvironmentBallast and bilge system Chemical processingDesalination plants Drilling rigs Drinking waterDry powder Food and beverage Gas plantsHAVC Mining industry Paper industry Sand handling Seawater Su

Contact Now

Alloy Staliness Steel Grooved End Butterfly Valve

Grooved End Butterfly Valve ductile iron +EPDM seat

Butterfly valve offers economical,efficient,and reliable service for grooved end piping applications.It is easily installed with two grooved end couplings.

Contact Now

Anti-condensation Aluminum Butterfly Valve

The principle of the anti-condensation butterfly valve is due to the corrosion resistance of the aluminum alloy body, which is light in weight and easy to install; the spherical structure around the butterfly plate is helpful to reduce the friction torque with the valve seat; the butterfly plate and the valve shaft are made of stainless steel, which increases The anti-corrosion ability also plays a role in reducing heat conduction and preventing the temperature of the driving device from being too low; the housing of the driving device is made of aluminum alloy, which is light in weight and fa

Contact Now

Industry Butterfly Valve Staliness Steel

WECO butterfly valve rubber seat

100% bi-directional tight shut-off. Installation without restrction in direction of flow.Reduced weight and overall dimensions.Low pressure loss and reduced energy costs.

Contact Now

6 inch Butterfly Valve WCB Body PTFE Seat

WCB BODY BUTTERFLY VALVE WITH PTFE SEAT HAND LEVER3 INCH BUTTERFLY VALVE WCB BODY PTFE SEAT6 INCH BFV CF8M DISC PTFE SEATInspection &TestAPI 598End StandardDIN PN10/16 ,ANSI B16.1,JIS 10K/5KFace to FaceAPI 609MaterialBodySS304/SS316/SS316LDiscCF8/CF8M/CF3MStemSS416/SS304/SS316/17-PHSeatEPDM/NBR/VITON/PTFEOperationHand lever Gear boxSizeDN25-DN700

Contact Now

PTFE Seat Lug Type Butterfly Valve

Huge choice of substances, relevant for diverse medium.Small in length and light in weight, smooth set up and protection.it can be set up wherever needed.Simple and compact construction,Go with the flow block is small.amazing law overall performance.Size:DN25-DN1200Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / PneumaticStandard:Design Standard:EN 593 , MSS SP67 API 609 BS5155Inspection & Test:API 598 ISO

Contact Now

PTFE Seat PTFE Coated Disc Butterfly Valve

Technical Parameters:SizeDN50-DN600Working pressure10BarShell15BarSeal(Air)11BarOperating Temperature-20℃~+180℃Operating EnvironmentBallast and bilge system Chemical processingDesalination plants Drilling rigs Drinking waterDry powder Food and beverage Gas plantsHAVC Mining industry Paper industry Sand handling Seawater Sugar industryThermo technical water treatment Waste wate

Contact Now

API6D Short Pattern Single Disc Wafer Check Valve

Material:The body materia: GG25,GGG40,GGG50The disc material: DI/SS304/SS316/AL-BZThe stem/spring material: SS416/SS304The seat material:NBR/EPDM/VITON Standard：ANSI/JIS/DIN/BS Usage：They are used for pipe of transporting water with such medium as water sewage and seawater.It can avoid media flowing backwards and prevent damaging water hammer,guarantee the safety using of pipes.Features:1. The products are new structure .small and light weight2. Reliable sealed,endurable open-close,erar-resisting,long life.3. With less flowing resistance than old check valve and obviou

Contact Now

DIN PN10 /ANSI 150 Pneumatic Butterfly Valve Rubber Seat

butterfly plate outer circle using spherical shape, improve the sealing performance and prolong the service life of the valve, with pressure open and close more than 50,000 times still maintain zero leakage. the sealing parts can be replaced, and the sealing is reliable to achieve two-way sealing. butterfly plate can be spraying coating according to user requirements, such as nylon or ptfe. the valve can be designed as flange connection and clamping connection.

Contact Now

Wafer Type Single Board Check Valve Aluminum

Wafer Type Single Board Check Valve Stainless Steel

Take a look at valve refers to the outlet and ultimate parts of the round disc and through its own weight and media stress generated movement to block the media float again valve. automatic valve magnificence, also referred to as test valve, one-way valve, backflow valve or isolation valve.Material:The body materia: GG25,GGG40,GGG50The disc material: DI/SS304/SS316/AL-BZThe stem/spring material: SS416/SS304The seat material:NBR/EPDM/VITON Standard：ANSI/JIS/DIN/BS Usage：They are used for pipe of transporting water with such medium as water sewage and seawater.It can avoid media

Contact Now

Relate News

The Advantages Of Gate Valve

Gate valve is a kind of cut-off valve, which is used to connect or cut off the medium in the pipeline. Gate valve's opening and closing member gate, driven by the valve stem, extend the seat to do linear lifting movement.Advantages of the gate valve.1. low fluid resistanceBecause the valve body of the gate valve internal media channel is straight, the media flow through the gate valve does not change its flow direction, so the fluid resistance is small.2.

Advantages and Disadvantages of Butterfly Valve

Advantage 1. The opening and closing is convenient, quick, labor-saving, low in fluid resistance, and can be operated frequently.2. Simple structure, small overall size, short structural length, small volume and light weight, which is suitable for large-diameter valves.3. Mud can be transported, and the liquid accumulated at the pipe mouth is the least.4. Under low pressure, good sealing can be achieved.5. Good adjustment performance. 6. When fully opened, the effective circulation area of the valve seat channel is large, and the fluid resistance is small.7.

The Difference Between Ball Valve and Butterfly Valve

1. Butterfly valve is composed of valve body, valve seat, valve plate and valve stem, and all fittings are exposed and can be seen at a glance; Ball valve is composed of valve body, valve core (a round ball) and valve stem. The position of valve core is inside the valve body, and only part of it can be seen by naked eyes, so the sealing performance of ball valve is better than that of butterfly valve.2. Butterfly valves are relatively simple in structure, and butterfly valves with low pressure are generally used. The zui high pressure of butterfly valves can only reach 64kg.

Common Check Valve Materials

Check valve is a valve installed in the pipeline to prevent the backflow of media. Check valves can be used on many types of pipelines such as over water, oil and gas, etc.

The meaning of butterfly valve and the problems that are easily overlooked in the use process

In production and life, the emergence of valves is that the utilization rate of their valves and accessories is getting higher and higher, such as check valves, check valves, electric butterfly valves, pneumatic butterfly valves, rubber soft joints, electric ball valves, one-way valves, and wafer butterfly valves. , filter, etc., which have brought great convenience to production and life.

The principle of check valve opening and closing

The check valve opening and closing parts are opened or closed by themselves by the flow and force of the medium to prevent the backflow of the medium. The valve is called a check valve. The check valve belongs to the automatic valve category, which is mainly used in the pipeline where the medium flows in one direction, and only allows the medium to flow in one direction to prevent accidents. The check valve, also known as a one-way valve or a check valve, is used to prevent the backflow of the medium in the pipeline.

Advantages Of Two Shaft Wafer Type Butterfly Valve

Advantages:1. easy and quick to start and close, labor-saving, low fluid resistance, can be operated frequently2. Simple structure, small size, short structure length, small volume, light weight3. start and close torque is small, because the butterfly plate on both sides of the shaft is basically equal to the action of the medium, and the direction of the torque generated is opposite, so it is relatively labor-saving4. The material of sealing surface generally adopts rubber, plastic, so the low pressure sealing performance is good.5.

Check Valve Applications

The purpose of using check valve is to avoid the backflow of medium, generally in the outlet of the pump should be installed check valve. In addition, the outlet of the compressor should also be installed check valve. In summary, in order to avoid the backflow of the medium, in the equipment, installation or pipeline should be installed check valve in general in the nominal diameter of 50mm of the horizontal pipeline are selected vertical lift check valve. Straight lift check valve in the horizontal pipeline and straight pipeline can be installed.

Pressure test method of check valve

Check valve refers to the valve that automatically opens and closes the valve flap by relying on the flow of the medium itself to prevent the backflow of the medium, also known as check valve, one-way valve, reverse flow valve, and back pressure valve.

Features of electric ball valve

The high-pressure pneumatic ball valve only needs to use the pneumatic actuator to rotate the air source by 90 degrees and a small rolling torque to be tightly closed. Completely equal valve body cavity provides medium with low resistance and straight-through flow path. It is generally believed that the ball valve is suitable for direct opening and closing applications, but recent developments have designed the ball valve so that it can be used for throttling and control systems.