Gear Operator-manufacture,factory,supplier from China

(Total 10 Products for Gear Operator)
Standard:Design Standard:EN 593 , MSS SP67   API 609  BS5155Inspection & Test:API 598  ISO 5208  EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.
  Contact Now
Size:DN25-DN1200 Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / PneumaticStandard:Design Standard:EN 593 , MSS SP67   API 609  BS5155Inspection & Test:API 598  ISO 5208  EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.
  Contact Now
Size:DN25-DN1200 Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / PneumaticStandard:Design Standard:EN 593 , MSS SP67   API 609  BS5155Inspection & Test:API 598  ISO 5208  EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.
  Contact Now
Flow block is small.Excellent regulation performance.Minimized operating torque, energy saving.It can be used for dead-end.Size:DN25-DN1200Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / PneumaticStandard:Design Standard:EN 593 , MSS SP67   API 609  BS5155Inspection & Test:API 598  ISO 5208  EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.
  Contact Now
1, easy to open and near quickly, hard work saving, fluid resistance is small, can frequently perform.  2, easy structure, small size, light weight.  Three, can shipping dust, on the mouth of the least liquid accumulation.  Four.
  Contact Now
Flow block is small.Excellent regulation performance.Minimized operating torque, energy saving.It can be used for dead-end.Size:DN25-DN1200Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / PneumaticStandard:Design Standard:EN 593 , MSS SP67   API 609  BS5155Inspection & Test:API 598  ISO 5208  EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.
  Contact Now
Resilient seated butterfly valve is a double flanged design which can be used for dead-end service .This butterfly valve series has many of the design features and benefits such as high Cv ratings ,minimum parts exposed to the line media ,greater reliability and a proven record of long service life .A major design advantage of this valve product lines is international compatibility.SizeDN100-DN1800DN100-DN1800Working pressure16Bar10BarShell24Bar15BarSeal18Bar11BarOperating Temperature-40℃~+160℃Operating EnvironmentBallast and bilge system       &nbs
  Contact Now
Tetrafluoride butterfly valve is to conform to three corrosive surroundings with sturdy acid and alkali, petroleum, chemical, food and distinct unique fields, in the conventional butterfly valve valve and valve plate lined with ptfe, just so the medium and valve body isolation, to acquire anticorrosive impact.Technical Parameters:SizeDN50-DN600Working pressure10BarShell15BarSeal(Air)11BarOperating Temperature-20℃~+180℃Operating EnvironmentBallast and bilge system          Chemical processingDesalination plants   Drilling rigs  &n
  Contact Now
WCB BODY BUTTERFLY VALVE WITH PTFE SEAT HAND LEVER3 INCH BUTTERFLY VALVE WCB BODY PTFE SEAT6 INCH BFV CF8M DISC PTFE SEATInspection &TestAPI 598End StandardDIN PN10/16 ,ANSI B16.1,JIS 10K/5KFace to FaceAPI 609MaterialBodySS304/SS316/SS316LDiscCF8/CF8M/CF3MStemSS416/SS304/SS316/17-PHSeatEPDM/NBR/VITON/PTFEOperationHand lever Gear boxSizeDN25-DN700
  Contact Now
Technical Parameters:SizeDN32-DN600DN650-DN2000Working pressure16Bar10BarShell24Bar15BarSeal(Air)6Bar6BarOperating Temperature-40℃~+160℃Operating EnvironmentBallast   and bilge system            Chemical processingDesalination plants   Drilling rigs      Drinking waterDry powder     Food and   beverage     Gas plantsHAVC  Mining industry  Paper industry      Sand handling     Seawater      Su
  Contact Now
Relate News
Different principlesButterfly valve, also known as flap valve, is a kind of regulating valve with simple structure. It can also be used for on-off control of low-pressure pipeline media, and it mainly plays the role of cutting off and throttling. When the butterfly valve is fully opened to fully closed, it is usually less than 90. The butterfly valve and the butterfly rod have no self-locking ability. In order to position the butterfly plate, a worm gear reducer should be installed on the valve stem.
Rubber soft joints have been widely used in the industry. The installation of rubber soft joints requires different installation requirements according to different types of rubber joints. Threaded screwed rubber joints: Pay attention to the installation of screwed rubber joints. The pipe fittings are laid flat on a horizontal surface. When installing, it is necessary to screw the threaded structure into the lifting section of the pipe fittings, and then screw the other section of the pipe fittings, keeping it on the horizontal plane to prevent uneven force during the installation process.
The high-pressure pneumatic ball valve only needs to use the pneumatic actuator to rotate the air source by 90 degrees and a small rolling torque to be tightly closed. Completely equal valve body cavity provides medium with low resistance and straight-through flow path. It is generally believed that the ball valve is suitable for direct opening and closing applications, but recent developments have designed the ball valve so that it can be used for throttling and control systems.
1. Butterfly valve is composed of valve body, valve seat, valve plate and valve stem, and all fittings are exposed and can be seen at a glance; Ball valve is composed of valve body, valve core (a round ball) and valve stem. The position of valve core is inside the valve body, and only part of it can be seen by naked eyes, so the sealing performance of ball valve is better than that of butterfly valve.2. Butterfly valves are relatively simple in structure, and butterfly valves with low pressure are generally used. The zui high pressure of butterfly valves can only reach 64kg.
Gate valve is a kind of cut-off valve, which is used to connect or cut off the medium in the pipeline. Gate valve's opening and closing member gate, driven by the valve stem, extend the seat to do linear lifting movement.Advantages of the gate valve.1. low fluid resistanceBecause the valve body of the gate valve internal media channel is straight, the media flow through the gate valve does not change its flow direction, so the fluid resistance is small.2.
Advantage 1. The opening and closing is convenient, quick, labor-saving, low in fluid resistance, and can be operated frequently.2. Simple structure, small overall size, short structural length, small volume and light weight, which is suitable for large-diameter valves.3. Mud can be transported, and the liquid accumulated at the pipe mouth is the least.4. Under low pressure, good sealing can be achieved.5. Good adjustment performance. 6. When fully opened, the effective circulation area of the valve seat channel is large, and the fluid resistance is small.7.
Y-kind strainer as an fundamental high-efficiency filtration system within the purification system engineering, has performed a exquisite position within the remedy of domestic wastewater and business sewage. with various blessings in layout and alertness, it's miles now desired.
The filter net adopts stainless steel double-layer net structure, which is durable, advanced in structure, small in flow resistance, convenient in sewage discharge, etc. It can be used in water, steam, oil, nitric acid, urea, oxidizing medium and other media. According to the user's needs, the mesh number of filter screen should be set, generally, the water supply network is 18-30 mesh, the ventilation network is 40-100 mesh, and the oil supply network is 100-480 mesh.
1. Handwheel, handle and transmission mechanism are not allowed to be used for lifting, and collision is forbidden. 2. The double gate valve should be installed vertically (i.e. the valve stem is in the vertical position and the handwheel is at the top). 3. The gate valve with bypass valve should be opened before opening (to balance the pressure difference between inlet and outlet and reduce the opening force). 4. Gate valve with transmission mechanism shall be installed according to the product instruction manual. 5.
The purpose of using check valve is to avoid the backflow of medium, generally in the outlet of the pump should be installed check valve. In addition, the outlet of the compressor should also be installed check valve. In summary, in order to avoid the backflow of the medium, in the equipment, installation or pipeline should be installed check valve in general in the nominal diameter of 50mm of the horizontal pipeline are selected vertical lift check valve. Straight lift check valve in the horizontal pipeline and straight pipeline can be installed.