Bare Shaft-manufacture,factory,supplier from China
(Total 10 Products for Bare Shaft)
Size:DN25-DN1200 Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / Pneumatic Standard:Design Standard:EN 593 , MSS SP67 API 609 BS5155Inspection & Test:API 598 ISO 5208 EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.
Contact Now
100% bi-directional tight shut-off. Installation without restrction in direction of flow.Reduced weight and overall dimensions.Low pressure loss and reduced energy costs.
Contact Now
The principle of the anti-condensation butterfly valve is due to the corrosion resistance of the aluminum alloy body, which is light in weight and easy to install; the spherical structure around the butterfly plate is helpful to reduce the friction torque with the valve seat; the butterfly plate and the valve shaft are made of stainless steel, which increases The anti-corrosion ability also plays a role in reducing heat conduction and preventing the temperature of the driving device from being too low; the housing of the driving device is made of aluminum alloy, which is light in weight and fa
Contact Now
100% bi-directional tight shut-off. Installation without restrction in direction of flow.Reduced weight and overall dimensions.Low pressure loss and reduced energy costs.
Contact Now
Size:2"-12"Pressure:200PSI/150PSIANSI Class: Class 125/Class 150Features: Short Neck,Two shaft/Pinless Type/ Notched BodyMaterial:Body: Cast Iron A126/ Ductile iron ASTM A536Disc: Ductile Iron (Ni Plated),Ductile Iron (Nylon Coated),Aluminum Bronze,CF8M / SS316Seat: E.P.D.M, BUNA-N,F.K.M./VITON, P.T.F.E (Teflon)Stem: Stainless Steel 416/ Stainless Steel 304Stem Style:Doubel D / Square ShaftOperator: Lever/ Gear / Actuator
Contact Now
Type:Safety Relief Valves, Adjustable Relief Valves, Combination Fill & Relief Valves, Pressure Reducing Control Valves, Water Pressure Reducing Valves, Pressure Regulators, Boiler Feed Valves, Bypass Control Valves, Mixing Valves, Temperature Regulating Valves, Globe Valves, Butterfly Valves, Constant Flow Rate Valves, Balancing Valves, Water Regulating Valves, Globe Type Control Valves
Contact Now
1, easy to open and near quickly, hard work saving, fluid resistance is small, can frequently perform. 2, easy structure, small size, light weight. Three, can shipping dust, on the mouth of the least liquid accumulation. Four.
Contact Now
1, easy to open and near quickly, hard work saving, fluid resistance is small, can frequently perform. 2, easy structure, small size, light weight. Three, can shipping dust, on the mouth of the least liquid accumulation. Four.
Contact Now
1, easy to open and near quickly, hard work saving, fluid resistance is small, can frequently perform. 2, easy structure, small size, light weight. Three, can shipping dust, on the mouth of the least liquid accumulation. Four.
Contact Now
100% bi-directional tight close-off. set up with out restrction in route of drift.decreased weight and overall dimensions.low pressure loss and reduced energy prices.
Contact Now
Relate News
Advantages:1. easy and quick to start and close, labor-saving, low fluid resistance, can be operated frequently2. Simple structure, small size, short structure length, small volume, light weight3. start and close torque is small, because the butterfly plate on both sides of the shaft is basically equal to the action of the medium, and the direction of the torque generated is opposite, so it is relatively labor-saving4. The material of sealing surface generally adopts rubber, plastic, so the low pressure sealing performance is good.5.
Rubber soft joints have been widely used in the industry. The installation of rubber soft joints requires different installation requirements according to different types of rubber joints. Threaded screwed rubber joints: Pay attention to the installation of screwed rubber joints. The pipe fittings are laid flat on a horizontal surface. When installing, it is necessary to screw the threaded structure into the lifting section of the pipe fittings, and then screw the other section of the pipe fittings, keeping it on the horizontal plane to prevent uneven force during the installation process.
Different principlesButterfly valve, also known as flap valve, is a kind of regulating valve with simple structure. It can also be used for on-off control of low-pressure pipeline media, and it mainly plays the role of cutting off and throttling. When the butterfly valve is fully opened to fully closed, it is usually less than 90. The butterfly valve and the butterfly rod have no self-locking ability. In order to position the butterfly plate, a worm gear reducer should be installed on the valve stem.
1. Handwheel, handle and transmission mechanism are not allowed to be used for lifting, and collision is forbidden.
2. The double gate valve should be installed vertically (i.e. the valve stem is in the vertical position and the handwheel is at the top).
3. The gate valve with bypass valve should be opened before opening (to balance the pressure difference between inlet and outlet and reduce the opening force).
4. Gate valve with transmission mechanism shall be installed according to the product instruction manual.
5.
Entering 2022, our orders for butterfly valves and check valves are increasingly full, and the delivery date has been scheduled to April. We will continue to maintain a booming production and sales situation, and will not be affected by the Spring Festival holiday at all. The delivery date will start in late February.In addition, in a new field, the photovoltaic new energy business sector, our company continued to win the bid for the supporting projects for the newly expanded production base of JA Technology and LONGi Group.
The high-pressure pneumatic ball valve only needs to use the pneumatic actuator to rotate the air source by 90 degrees and a small rolling torque to be tightly closed. Completely equal valve body cavity provides medium with low resistance and straight-through flow path. It is generally believed that the ball valve is suitable for direct opening and closing applications, but recent developments have designed the ball valve so that it can be used for throttling and control systems.
The filter net adopts stainless steel double-layer net structure, which is durable, advanced in structure, small in flow resistance, convenient in sewage discharge, etc. It can be used in water, steam, oil, nitric acid, urea, oxidizing medium and other media. According to the user's needs, the mesh number of filter screen should be set, generally, the water supply network is 18-30 mesh, the ventilation network is 40-100 mesh, and the oil supply network is 100-480 mesh.
Y-kind strainer as an fundamental high-efficiency filtration system within the purification system engineering, has performed a exquisite position within the remedy of domestic wastewater and business sewage. with various blessings in layout and alertness, it's miles now desired.
Advantage 1. The opening and closing is convenient, quick, labor-saving, low in fluid resistance, and can be operated frequently.2. Simple structure, small overall size, short structural length, small volume and light weight, which is suitable for large-diameter valves.3. Mud can be transported, and the liquid accumulated at the pipe mouth is the least.4. Under low pressure, good sealing can be achieved.5. Good adjustment performance. 6. When fully opened, the effective circulation area of the valve seat channel is large, and the fluid resistance is small.7.
1. Butterfly valve is composed of valve body, valve seat, valve plate and valve stem, and all fittings are exposed and can be seen at a glance; Ball valve is composed of valve body, valve core (a round ball) and valve stem. The position of valve core is inside the valve body, and only part of it can be seen by naked eyes, so the sealing performance of ball valve is better than that of butterfly valve.2. Butterfly valves are relatively simple in structure, and butterfly valves with low pressure are generally used. The zui high pressure of butterfly valves can only reach 64kg.
